del6600
New Member
Call Sign : 26-CT-2711
Posts : 4
Times Thanked : 0
Join date : 2019-06-28
QTH or Location : Herefordshire
Equipment Used : Yaesu FT891-EFHW80-10 ant & Gainmaster 10/11/12mt 5/8 HF Ant- DG503 3.5'' Digital SWR/WATT Meter-QRM Eliminator + Yaesu FTM400XD Tx/Rx-Diamond FX510N VHF/UHF Ant
 |  Subject: SS9900 DC LOW?  Sun Aug 11, 2019 8:28 pm | |
| Hi,
I have a SS9900 radio.
When I switch on and call out all I am getting is "DC LOW"
I have tested the 13.8v 20A psu, that's ok.
To confirm this I took the radio out to my car and plugged it in
with the same result. I re-flashed the radio with the original
software it came with 16 months ago. Same problem?
Anyone any ideas what the problem is?
Hopeful
del | |
|
Sgt Bilko
Major contributor
Call Sign : 108 ct 302 - mm0ibe
Posts : 261
Times Thanked : 17
Join date : 2019-07-20
QTH or Location : Prestonpans. East Lothian
Equipment Used : SS9900
Age : 55
| | Subject: Re: SS9900 DC LOW? Sun Aug 11, 2019 10:49 pm | |
| Try the programming software. I think you can set an upper and lower voltage.
Paul | |
|
del6600
New Member
Call Sign : 26-CT-2711
Posts : 4
Times Thanked : 0
Join date : 2019-06-28
QTH or Location : Herefordshire
Equipment Used : Yaesu FT891-EFHW80-10 ant & Gainmaster 10/11/12mt 5/8 HF Ant- DG503 3.5'' Digital SWR/WATT Meter-QRM Eliminator + Yaesu FTM400XD Tx/Rx-Diamond FX510N VHF/UHF Ant
| | Subject: Re: SS9900 DC LOW? Mon Aug 12, 2019 8:55 am | |
| - Sgt Bilko wrote:
- Try the programming software. I think you can set an upper and lower voltage.
Paul Thanks for the reply, have tried that = 14v > 11v? I have just adjusted the voltage settings now 14v > 9v When I key the mic now all I get is a black screen, when I release the key I get a beep. Beeps and roger beeps have been turned off. I am beginning to wonder if the TIP36C PNP Power Transistor or the 4 13N10 finals have gone?  | |
|
Sponsored content
| | Subject: Re: SS9900 DC LOW? | |
| |
|
