Charlie Tango 11m DX Radio Group Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.


Welcome to the Charlie Tango DX Group. The home of ALL things Radio - CB, 11m DX, Amateur, PMR446, PLD, Network and Data. We welcome all radio enthusiasts of all knowledge levels. Join today and claim your own unique World Famous CT Call-sign
 
HomeEventsCalendarFAQSearchRegisterLog in

Navigation
Useful Radio Sites
Log in
Username:
Password:
Log in automatically: 
:: I forgot my password
CT Bill Board





Views This Year
All Time Views
Classified Adverts

Latest topics
» Homebrew ATU for 160m with a way too short antenna!
Band width setting for PMR channels  Icon_minitimeToday at 12:32 pm by Alan Pilot

» Distorted modulation on CB
Band width setting for PMR channels  Icon_minitimeToday at 12:19 pm by Alan Pilot

» Mobile antenna
Band width setting for PMR channels  Icon_minitimeToday at 11:12 am by Sharpshooter

» CT call-sign request (Issued)
Band width setting for PMR channels  Icon_minitimeToday at 7:18 am by StevieG

» Call sign request (Issued)
Band width setting for PMR channels  Icon_minitimeToday at 12:48 am by Marc

» ProComm PT-99 PROTON – Fibreglass Base Station Antenna Review
Band width setting for PMR channels  Icon_minitimeYesterday at 11:06 pm by Marc

» South Coast PMR net report
Band width setting for PMR channels  Icon_minitimeYesterday at 10:17 am by Victor

» Southern Area and South Coast SSB Net
Band width setting for PMR channels  Icon_minitimeWed Aug 17, 2022 6:33 pm by Chickenfoot@1987

» Call sign request (Issued)
Band width setting for PMR channels  Icon_minitimeWed Aug 17, 2022 5:56 pm by Craigsimmouk

Keywords
division 2022 yaesu display power Baofeng Sirio chart callsign frequency Mobile Mckinley Calling ALINCO SS6900 6900 call ss9900 lincoln list president antenna midland radio 9900 sign
QRZ Database

 

 Band width setting for PMR channels

Go down 
3 posters
AuthorMessage
Templar
Contributor
Contributor
Templar


Call Sign : 26-CT-3550 Ham:- M7DEW
Posts : 90
Times Thanked : 3
Join date : 2019-08-14
QTH or Location : Huddersfield West Yorkshire. UK
Equipment Used : Yaesu FT-450D. CRT SS 6900n. CRT Micron
Age : 63

Band width setting for PMR channels  Empty
PostSubject: Band width setting for PMR channels    Band width setting for PMR channels  Icon_minitimeMon Aug 10, 2020 8:18 pm

Hi all, hope you're all doing O. K. 
I've noticed a lot of activity recently, so I've just programmed all the 16 analogue PMR channels into my CRT MICRON, so I can use the scan function. 
I'm wanting to know which Bandwidth setting to use? 
Choices are:- Wide = 25K   Mid = 20K   Narrow = 12.5K

Cheers and thanks in advance. 
Stay safe 
Dale 
CT3550

Alan - Mirror Man and Salvage1 like this post

Back to top Go down
View user profile
Victor
CT Directors
CT Directors
Victor


Call Sign : 26-CT-3228 Ham M7VIC
Posts : 3445
Times Thanked : 215
Join date : 2019-11-10
QTH or Location : Bedford
Equipment Used : Various

Band width setting for PMR channels  Empty
PostSubject: Re: Band width setting for PMR channels    Band width setting for PMR channels  Icon_minitimeMon Aug 10, 2020 8:41 pm

Hi Dale,

The channels are spaced 12.5khz apart on the analogue 16 channels and the modulation mode is NBFM, (Narrow Band Frequency Modulation - 2.5khz deviation)

I think that's what you're after? Wink


All the best,
Victor
Back to top Go down
View user profile https://www.qrz.com/db/M7VIC
Templar
Contributor
Contributor
Templar


Call Sign : 26-CT-3550 Ham:- M7DEW
Posts : 90
Times Thanked : 3
Join date : 2019-08-14
QTH or Location : Huddersfield West Yorkshire. UK
Equipment Used : Yaesu FT-450D. CRT SS 6900n. CRT Micron
Age : 63

Band width setting for PMR channels  Empty
PostSubject: Re: Band width setting for PMR channels    Band width setting for PMR channels  Icon_minitimeMon Aug 10, 2020 9:14 pm

Hi Victor, thanks for the reply. 
Yes, it seems logical that with 12.5khz spacing that the bandwidth is the same, but you never know.
I'm sure someone will be along shortly with a confirmation or the right information. 
I'm new to this pmr stuff but quite frankly I'm having a lot of fun listening so I thought I'd put together a more permanent setup, together with a better antenna. 
It's really very active around here and the additional channels that Ofcom gave us are lively without the usual kids playing about. I guess they only have the 8 channel models. 
I'm surprised at how clear and clean the received modulation is too, much less interference than on the 27Mhz.
I don't know why I didn't have a go with this sooner. 
Anyway stay well mate. 
73's 
Dale 
P. S. Can anyone confirm Narrow setting - 12.5k.?  Cheers
Back to top Go down
View user profile
Red Fox
Senior contributor
Senior contributor
Red Fox


Call Sign : 108-CT-255
Posts : 130
Times Thanked : 16
Join date : 2020-04-24
QTH or Location : Fife Scotland
Equipment Used : Squawk Boxes & Wires - Both Annoy the other half :)

Band width setting for PMR channels  Empty
PostSubject: Re: Band width setting for PMR channels    Band width setting for PMR channels  Icon_minitimeMon Aug 10, 2020 9:35 pm

Hi Dale,

This may be of some help.

https://www.wildtalk.com/knowledge-base/pmr-446-technical-specification/#:~:text=Bandwidth%2012.5kHz%20%26%206.25Khz%20with%20some%20digital%20modes.

Cheers

Graeme.

Templar likes this post

Back to top Go down
View user profile
Templar
Contributor
Contributor
Templar


Call Sign : 26-CT-3550 Ham:- M7DEW
Posts : 90
Times Thanked : 3
Join date : 2019-08-14
QTH or Location : Huddersfield West Yorkshire. UK
Equipment Used : Yaesu FT-450D. CRT SS 6900n. CRT Micron
Age : 63

Band width setting for PMR channels  Empty
PostSubject: Re: Band width setting for PMR channels    Band width setting for PMR channels  Icon_minitimeMon Aug 10, 2020 10:13 pm

Cheers for that Graeme. Interesting website. 
Going to program all the channels with the narrow band setting. 

73's 
Dale 
CT3550
Back to top Go down
View user profile
Sponsored content





Band width setting for PMR channels  Empty
PostSubject: Re: Band width setting for PMR channels    Band width setting for PMR channels  Icon_minitime

Back to top Go down
 
Band width setting for PMR channels
Back to top 
Page 1 of 1
 Similar topics
-
» How the 11m band came to being Citizens Band Radio
» Gosh setting up a baofeng
» Complete novice (idiot) needs help setting up first time.
» Busiest channels?
» LPD and extra 8 PMR channels

Permissions in this forum:You cannot reply to topics in this forum
Charlie Tango 11m DX Radio Group Forum :: Help and Discussion Forums :: PMR446, DMR, LPD Radios-
Jump to: