Would you like to react to this message? Create an account in a few clicks or log in to continue.
Welcome to the Charlie Tango DX Group. The home of ALL things Radio - CB, 11m DX, Amateur, PMR446, PLD, Network and Data. We welcome all radio enthusiasts of all knowledge levels. Join today and claim your own unique World Famous CT Call-sign
Join in with the fun of the Charlie Tango DX Group Winter 11m Challenge - from December 1st 2024
Call Sign : 26-CT-5188 Posts : 25 Times Thanked : 0 Join date : 2024-06-08 QTH or Location : Olde Felixstowe Equipment Used : Two President McKinleys, homebase & mobile.
Subject: Pres McKinley Thu Nov 28, 2024 9:54 pm
Hoiya
Advice please.
I've soldered the little white wire to revert the rig back to standard but cannot get the UK channels even after I've tried a reset as well as pressing F then turning the rig back on. Have I missed something?
Thanks in advance
Poikey Hägar
glenn dog likes this post
glenn dog Major contributor
Call Sign : 56-CT-004 Posts : 641 Times Thanked : 14 Join date : 2019-08-23 QTH or Location : Oulu -Finland Equipment Used : YAESU 450D, PRESIDENTLINCOLN 2 PLUS, PRESIDENT MK KINLEY , SUPERSTAR 360, PRESIDENT RANDY 3, ZODIAK NEO, TTI HAND HELD CB, PRESIDENT GRANT 2, NEW VERSION, PMR RADIOS.
Subject: Re: Pres McKinley Fri Nov 29, 2024 7:21 am
I had a look around the net to find a fix, nothing came up, i can only say try to check the joint you have done on the small white cable, some body will come on later today and hopefully have a fix for you, it may be a Menu task.
skyrider and Poikey like this post
weealan Contributor
Call Sign : 108-CT-355 Posts : 66 Times Thanked : 10 Join date : 2023-01-23 QTH or Location : Bathgate. Locator IO85EV Equipment Used : Yaesu FT 817
Subject: Re: Pres McKinley Fri Nov 29, 2024 7:52 am
Have you tried this way with the F button ?
https://www.youtube.com/watch?v=ZnOkGl3BqKI
glenn dog and Poikey like this post
Poikey New Member
Call Sign : 26-CT-5188 Posts : 25 Times Thanked : 0 Join date : 2024-06-08 QTH or Location : Olde Felixstowe Equipment Used : Two President McKinleys, homebase & mobile.
Subject: Re: Pres McKinley Fri Nov 29, 2024 9:57 am
Have tried the F button both ways as suggested & via the handbook. The joint appears to be fine but will see if I can resolder it.
weealan Contributor
Call Sign : 108-CT-355 Posts : 66 Times Thanked : 10 Join date : 2023-01-23 QTH or Location : Bathgate. Locator IO85EV Equipment Used : Yaesu FT 817
Subject: Re: Pres McKinley Fri Nov 29, 2024 10:12 am
did you put the jumper back to original position
Poikey New Member
Call Sign : 26-CT-5188 Posts : 25 Times Thanked : 0 Join date : 2024-06-08 QTH or Location : Olde Felixstowe Equipment Used : Two President McKinleys, homebase & mobile.
Subject: Re: Pres McKinley Fri Nov 29, 2024 10:19 am
Today at 10:00 pm by TamGlasgow
Subject: Pres McKinley 
