26CT231ANDY
New Member
Call Sign : 26-CT-231
Posts : 34
Times Thanked : 0
Join date : 2019-08-11
QTH or Location : Cambridge
Equipment Used : Linoln 2
 |  Subject: Best frequency to SWR my A99 for use on 11 meters  Sat Jun 13, 2020 9:44 am | |
| Hi All Trust all are well, maybe a old question, which would be the best frequency to SWR my A99 aerial to optimize bit performance on 11 meters using my Lincoln 2, SWR on 27.555 on FM so i get a consent power input to the aerial, to measure the forward and SWR. Thank you very much Cheers  Andy 26CT231 | |
|
26TC62
Senior contributor
Call Sign : 26TC62, 26CT2817
Posts : 141
Times Thanked : 29
Join date : 2019-06-27
QTH or Location : Portsmouth
Equipment Used : Yaesu 891, 10m pole, wire 5/8, T2LT
| | Subject: Re: Best frequency to SWR my A99 for use on 11 meters Sat Jun 13, 2020 9:54 am | |
| If you do that you will get reasonable coverage of the Mids and the UK 40 as well as the bit in between. But perhaps do the tuning just off the T5 to avoid blocking i when you transmit - it will be "near enough" if you do it on 565 or 545 | |
|
Northern Crusader
Major contributor
Call Sign : M0GVZ / 26CT1760
Posts : 530
Times Thanked : 35
Join date : 2019-11-13
QTH or Location : IO94SA
Equipment Used : Icom 7300, TS480, President McKinley, Albrecht AE6110, CRT Mike
Age : 53
| | Subject: Re: Best frequency to SWR my A99 for use on 11 meters Sun Jun 14, 2020 7:24 pm | |
| You shouldn't need to touch the tuning on an A99. I've had multiple A99s and Imax 2000s over the years and never needed to touch the tuning rings.
As long as the SWR is below 1.6-1.8:1 over the channels you intend to use then that'll do. Don't go chasing 1:1 because there's no advantage to be had. | |
|
Sponsored content
| | Subject: Re: Best frequency to SWR my A99 for use on 11 meters | |
| |
|
