YAESU FT4XE Repeater Programming UK

Does anyone have a simple step to step guide for the FT4XE to adding a repeater with UK parameters all on line videos seem to be american who use auto shift which does not work for UHF shifts in the UK

Ah you need to go into a hidden menu to change the Automatic Repeater Shift from B2 for IARU Region2 to C2 for IARU Region 1. Fortunately Yaesu tell you how to do this. Once you've done it the repeater shifts will work properly.

http://www.hamradio.co.uk/userfiles/ARS_Setting_sheet_E00005042.pdf

Caution: When you do this you lose all saved settings, all the menu settings, memories etc so back them up. If you do a factory reset in the future it doesn't alter the ARS from what you've set it to.

So to do it:

1. Turn the transceiver OFF.
2. Press and hold the MONI/T.CALL key and the PTT switch simultaneously, while turning the transceiver ON.
3. When the LCD backlight comes on, release the MONI/T.CALL key and PTT switch.
4. Press the [0][2][2] keys.The radio will re-start automatically.

Setting of the ARS feature to “Configuration C2” is successfully completed.To restore the ARS feature setting to the factory default (B2), perform the same procedures above.

Thank You very much