SS 6900N V6 Data file ? Can anyone Help ?

Hi, just throwing this out there on the off chance, Does anyone have or can make a Data file for the UK 40 channels. My ss6900n does have the UK 40 legal channels but they are on Band "A" and not on band "F" so I'm looking for a data file that I can load onto mine that will put the 40 on F. Anyone with a ss6900n and a lead can make a data file very easily. or if anyone knows if they can be programmed to F with the software...….cheers guys

I have v6 file with uk 40 on f but cant see how to upload it

bigdigger wrote:

I have v6 file with uk 40 on f but cant see how to upload it

Thanks for the reply bigdigger, I will private message you with my email address if that's ok and if you would be so kind , you can email it to me if that's ok ....Mick

how do I read the private message

bigdigger wrote:

how do I read the private message

Hi,
Top of the page on the tool bar you will find your message tab next to the log out button

Regards

that's it emailed to you say if works ok

bigdigger wrote:

that's it emailed to you say if works ok

Thanks Steven, received , loaded on my ss6900 and programmed beautifully, thanks very much mate I'm I owe you a favour.


Mick

glad I good help

Hi chaps any chance you could sent me over that file pleaseeeeeee

Hi, can someone please send me the data file for the 6900N, as I had to do a reset and lost the export channels. It would be great to have the one which was being talked about here with the UK 40 on F.

Massive thanks in advance..

John 68CT045

Badgeruk1980 wrote:

Hi chaps any chance you could sent me over that file pleaseeeeeee

hi Mate, if you look at my post on link to the Topic , you can download it straight onto your pc, you will need the SRT update software from the SRT site...… Good luck  

73's


Mick


http://www.charlietango.co.uk/t229-free-software-downlaod-site-and-cb-ham-equipment-accessories

[quote="Ultimitmale"]Hi, can someone please send me the data file for the 6900N, as I had to do a reset and lost the export channels. It would be great to have the one which was being talked about here with the UK 40 on F.


Hi John, I just poster the link to the Topic on the site that you can download the file from, but as I said to BadgerUk, you will need the software from the SRT website to update it. Any problems ill be pleased to help.


73's


Mick

Topic link : http://www.charlietango.co.uk/t229-free-software-downlaod-site-and-cb-ham-equipment-accessories

Hi Micky, As for the "SRT update software" will I still need that as I said the rig was in export mode and had an error a few months later and we just did the reset as per instructions on the yellow sticker on the top of the rig.

I have the usb lead and the software but just need the data to upload and transfer onto the rig. I am just wanting to see if anyone had their file saved that I may use

Ultimitmale wrote:

Hi Micky, As for the "SRT update software" will I still need that as I said the rig was in export mode and had an error a few months later and we just did the reset as per instructions on the yellow sticker on the top of the rig.

I have the usb lead and the software but just need the data to upload and transfer onto the rig. I am just wanting to see if anyone had their file saved that I may use

Hiya, Im pretty sure if you have done a reset, and you don't have the UK 40 on it you will have to update it.

If you private message me your email address I will send you the data file


73's


Mick

Mick, thank you very much, I sent you a pm and if there are any issues it is john1965@gmx.com. For anyone lookin a new email address with a shorter address before the @ even for junk etc I have been using it for about 2 x years now.

Thanks Mick

Hiya,


Ive emailed you the data file, any problems give me a shout.

73's


Mick

mickyboy you are a star, thank you soo very much, I have it saved along with the update and will probebly do it over the weekend.

Cheers bud

John

John.

I have a copy as well if you get stuck.

Steven

Badgeruk1980 wrote:

John.

I have a copy as well if you get stuck.

Steven

Thanks bud, I have it saved in my folder along with the update and exe programe which I have installed. I imported the file from mickyboy and all looks great.
Thanks for all the help guys and if any of you loose your file for some strange reason gimmie a shout back

Evening guys,

Is there any chance someone could send me the dat file too?

Thanks in advance

Tom

tomphale wrote:

Is there any chance someone could send me the dat file too?

Hi Tom,,,   feel free to pm me your email address and ill gladly send you the file   !


73's



Mick

cheers mick,

I've managed to get sorted now but thanks for getting back to me

Tom

hi can someone send me the dat file any help will be appreciated thanks larry

Hello. Would it be possible to send me the file too? Many thanks.

I have my own file that's different to the one on here. It is for an SS6900n.
My problem is windows 10 won't give me the port required.
Is there any way around this.

Paul.