Would you like to react to this message? Create an account in a few clicks or log in to continue.
Welcome to the Charlie Tango DX Group. The home of ALL things Radio - CB, 11m DX, Amateur, PMR446, PLD, Network and Data. We welcome all radio enthusiasts of all knowledge levels. Join today and claim your own unique World Famous CT Call-sign
Call Sign : 169-CT004 Posts : 3 Times Thanked : 0 Join date : 2024-01-28 QTH or Location : St Peter Port, Guernsey Equipment Used : Absolute beginner
Subject: Introduction and call-sign request (Issued) Sun Jan 28, 2024 5:49 pm
Hi,
recently developed an interest in radio communications, i'll be honest its mostly due to going down the disaster prep rabbit hole. Got myself a Quansheng UVK5 and realised this sort of stuff really interests me. I haven't purchased my radio equipment yet but i like the look of the President stuff, it'll be a mobile set up on my van down here in Guernsey.
Could you please provide me with a call-sign.
Cheers.
Red Rooster LN-4614 likes this post
John123 CT Directors
Call Sign : 26CT763 Posts : 4570 Times Thanked : 162 Join date : 2019-06-27 QTH or Location : Manchester Equipment Used : Optima, Superstar 360fm, Stalker 9fdx, President Jack Age : 50
Subject: Re: Introduction and call-sign request (Issued) Sun Jan 28, 2024 10:00 pm
Hello and welcome,
If you could fill-in your name and nearest town in Guernsey, please? Then Victor or Gary will beable to issue you with a call-sign. Thank you.
73s John.
wetware New Member
Call Sign : 169-CT004 Posts : 3 Times Thanked : 0 Join date : 2024-01-28 QTH or Location : St Peter Port, Guernsey Equipment Used : Absolute beginner
Subject: Re: Introduction and call-sign request (Issued) Sun Jan 28, 2024 10:22 pm
John123 wrote:
Hello and welcome,
If you could fill-in your name and nearest town in Guernsey, please? Then Victor or Gary will beable to issue you with a call-sign. Thank you.
73s John.
Hi John, have updated my profile.
Cheers
John123 likes this post
Victor CT Directors
Call Sign : 26-CT-3228 / M7VIC Posts : 6260 Times Thanked : 389 Join date : 2019-11-10 QTH or Location : Bedford Equipment Used : Various
Subject: Re: Introduction and call-sign request (Issued) Mon Jan 29, 2024 6:00 am
Hello there and welcome to Charlie Tango DX.
If we can just know your first name either signed off here or filled in on your forum profile I can get you allocated a call sign.
(I can't presume from your email address as many here utilise pseudonyms.)
I'll swing by again on my next round of allocations and get you issued once that's done.
All the best, Victor
CT Admin.
wetware New Member
Call Sign : 169-CT004 Posts : 3 Times Thanked : 0 Join date : 2024-01-28 QTH or Location : St Peter Port, Guernsey Equipment Used : Absolute beginner
Subject: Re: Introduction and call-sign request (Issued) Mon Jan 29, 2024 8:47 am
Hi Victor, I thought I’d added my name to my profile last night but seems I didn’t save that change. Should be on there now.
John123 and Victor like this post
Victor CT Directors
Call Sign : 26-CT-3228 / M7VIC Posts : 6260 Times Thanked : 389 Join date : 2019-11-10 QTH or Location : Bedford Equipment Used : Various
Subject: Re: Introduction and call-sign request (Issued) Mon Jan 29, 2024 10:19 am
Hello Will,
Thanks for updating and don't worry forums can be a bit of a pain.
I am delighted to allocate you 169-CT-004 may you have good luck with it.
All the best, Victor
CT Admin
wetware likes this post
Sponsored content
Subject: Re: Introduction and call-sign request (Issued)