pdes New Member
Call Sign : 26-CT-5122 Posts : 22 Times Thanked : 0 Join date : 2020-12-13 QTH or Location : Royston Equipment Used : Anytone AT-5555 Plus, Silver Rod 1/2 Wave
| Subject: Anytone AT-5555 plus Computer connection Wed Mar 13, 2024 4:51 pm | |
| I have connected my rig to both a Windows 11 and Windows 10 PC with the Anytone cord. When trying to download the current config, the download stops very near the end of the transfer but then errors with the message"Runtime Error 6 Overflow". Any ideas?
Cheers, David - 26CT5122 | |
|
babis3g Senior contributor
Call Sign : 18-CT-006 Posts : 164 Times Thanked : 2 Join date : 2022-11-16 QTH or Location : Corfu Greece, jm99ug Equipment Used : PNI 6500 & Sirio Boomerang 27A Age : 55
| Subject: Re: Anytone AT-5555 plus Computer connection Wed Mar 13, 2024 5:44 pm | |
| from an other forum - Quote :
- Load default settings in the software at first. Check that both are set in the same mode. Export or Ham mode. Write to radio at first, then reading and reprogramming should be possible.
| |
|
pdes New Member
Call Sign : 26-CT-5122 Posts : 22 Times Thanked : 0 Join date : 2020-12-13 QTH or Location : Royston Equipment Used : Anytone AT-5555 Plus, Silver Rod 1/2 Wave
| Subject: Re: Anytone AT-5555 plus Computer connection Thu Mar 14, 2024 10:34 am | |
| - babis3g wrote:
- from an other forum
- Quote :
- Load default settings in the software at first. Check that both are set in the same mode. Export or Ham mode. Write to radio at first, then reading and reprogramming should be possible.
Thanks, this fixed it!! Rgds | |
|
Sponsored content
| Subject: Re: Anytone AT-5555 plus Computer connection | |
| |
|