Would you like to react to this message? Create an account in a few clicks or log in to continue.
Welcome to the Charlie Tango DX Group. The home of ALL things Radio - CB, 11m DX, Amateur, PMR446, PLD, Network and Data. We welcome all radio enthusiasts of all knowledge levels. Join today and claim your own unique World Famous CT Call-sign
Join in with the fun of the Charlie Tango DX Group Winter 11m Challenge - from December 1st 2024
Call Sign : CT3062 Nimrod. M7ALQ Posts : 15 Times Thanked : 0 Join date : 2019-06-28 QTH or Location : Newcastle upon Tyne and on the surrounding big, big hills Equipment Used : 6900n x2, NATO 2000, AE 2990 handheld Baofeng 446 SW radio & Scanner's and more with an Antron 99 @ 30+ft at home but on a 40 ft telescopic or a Thunderbolt + roach pole on the hills Kenwood TS570d Yaesu 450 JRC-NRD 345 Receiver Leixen 898s 40 metre end fed wire and vertical HF 360 @ 30ft Diamond X50 @ 30ft Ray Jeff 660 ADF
Subject: Re: No tx on Yaesu 857d Thu Feb 25, 2021 8:33 pm
Brand new - (less than 12 months old) - Yaesu 857D used as a receiver only since bought brilliant receive from all over. Used it for transmission for the first time last night and nothing, no output signal whatsoever. Checked and double-checked everything. As I said receiving perfectly but no transmit any thoughts or suggestions before I box it up and return it
Alan Pilot Major contributor
Call Sign : 163-CT-220... Posts : 2657 Times Thanked : 70 Join date : 2019-11-19 QTH or Location : Anglesey North Wales Equipment Used : Yaesu FT-991A,,Yaesu FTDX-10,,Icom ic-7610,,Anytone AT-D878UV PLUS",,LINCOLN II+. Age : 16
Subject: Re: No tx on Yaesu 857d Thu Feb 25, 2021 8:53 pm
NimrodMR2 wrote:
Brand new - (less than 12 months old) - Yaesu 857D used as a receiver only since bought brilliant receive from all over. Used it for transmission for the first time last night and nothing, no output signal whatsoever. Checked and double-checked everything. As I said receiving perfectly but no transmit any thoughts or suggestions before I box it up and return it
Better off starting your own thread but what frequency did you try to transmit on.
NimrodMR2 New Member
Call Sign : CT3062 Nimrod. M7ALQ Posts : 15 Times Thanked : 0 Join date : 2019-06-28 QTH or Location : Newcastle upon Tyne and on the surrounding big, big hills Equipment Used : 6900n x2, NATO 2000, AE 2990 handheld Baofeng 446 SW radio & Scanner's and more with an Antron 99 @ 30+ft at home but on a 40 ft telescopic or a Thunderbolt + roach pole on the hills Kenwood TS570d Yaesu 450 JRC-NRD 345 Receiver Leixen 898s 40 metre end fed wire and vertical HF 360 @ 30ft Diamond X50 @ 30ft Ray Jeff 660 ADF
Subject: Re: No tx on Yaesu 857d Thu Feb 25, 2021 8:57 pm
20 metre band - 14.240
Sydthecat CT Directors
Call Sign : 2E0VRX Posts : 776 Times Thanked : 47 Join date : 2019-06-26 QTH or Location : Yorkshire dales Equipment Used : Yaesu FTdx 101d, MD200 mic ,Mosley 3ele Yagi Age : 59
Subject: Re: No tx on Yaesu 857d Thu Feb 25, 2021 9:02 pm
NimrodMR2 wrote:
Brand new - (less than 12 months old) - Yaesu 857D used as a receiver only since bought brilliant receive from all over. Used it for transmission for the first time last night and nothing, no output signal whatsoever. Checked and double-checked everything. As I said receiving perfectly but no transmit any thoughts or suggestions before I box it up and return it
Yes as Alan rightly says best to start your own thread, could be any number of things so will defo need more details
I would certainly do a full factory reset Make sure the antenna your trying to TX on has no SWR problems or test into a suitable dummy load Make sure VOX is not on Are you using the correct antenna port
Craig
NimrodMR2 New Member
Call Sign : CT3062 Nimrod. M7ALQ Posts : 15 Times Thanked : 0 Join date : 2019-06-28 QTH or Location : Newcastle upon Tyne and on the surrounding big, big hills Equipment Used : 6900n x2, NATO 2000, AE 2990 handheld Baofeng 446 SW radio & Scanner's and more with an Antron 99 @ 30+ft at home but on a 40 ft telescopic or a Thunderbolt + roach pole on the hills Kenwood TS570d Yaesu 450 JRC-NRD 345 Receiver Leixen 898s 40 metre end fed wire and vertical HF 360 @ 30ft Diamond X50 @ 30ft Ray Jeff 660 ADF
Subject: No tx on Yaesu 857d Thu Feb 25, 2021 9:04 pm
Today at 4:10 pm by VanRougeT4
Subject: Re: No tx on Yaesu 857d 
Have started a new thread as advised