Would you like to react to this message? Create an account in a few clicks or log in to continue.
Welcome to the Charlie Tango DX Group. The home of ALL things Radio - CB, 11m DX, Amateur, PMR446, PLD, Network and Data. We welcome all radio enthusiasts of all knowledge levels. Join today and claim your own unique World Famous CT Call-sign
Join in with the fun of the Charlie Tango DX Group Summer 10m Challenge - from April 1st 2024
Call Sign : 26-CT-3987 Posts : 9 Times Thanked : 0 Join date : 2021-02-11 QTH or Location : Gosport Equipment Used : Zello
Subject: K po power mic for president mckinley Sat May 21, 2022 8:49 am
I want to wire up the k po 532 to my mckinley but the mic is a 4 wire and the mckinley is a 6 pin. I'm not sure what wire goes on what pin. I found a wiring diagram online for the 6 pin mckinley wires but im still not sure. If anyone could let me know what colour wires on the k po go on what pins on the mckinley mic plug id be very grateful.
Thanks 26ct3987
Alan Pilot Major contributor
Call Sign : 163-CT-220...MW7TTA Posts : 2516 Times Thanked : 69 Join date : 2019-11-19 QTH or Location : Anglesey North Wales Equipment Used : Yaesu FT-991A,,Yaesu FTDX-10,,Icom ic-7300,,Anytone AT-D878UV PLUS",,LINCOLN II+. Age : 150
Subject: Re: K po power mic for president mckinley Sat May 21, 2022 1:23 pm
The 2 wires missing will be for the up and down buttons.
Today at 4:35 pm by stealth 57
Subject: K po power mic for president mckinley 
