Would you like to react to this message? Create an account in a few clicks or log in to continue.
Welcome to the Charlie Tango DX Group. The home of ALL things Radio - CB, 11m DX, Amateur, PMR446, PLD, Network and Data. We welcome all radio enthusiasts of all knowledge levels. Join today and claim your own unique World Famous CT Call-sign
Join in with the fun of the Charlie Tango DX Group Summer 10m Challenge - from April 1st 2024
Posts : 39 Times Thanked : 0 Join date : 2022-12-25 QTH or Location : Chesterfield Equipment Used : Icom 718
Subject: 12 to 24v variable power supply recommendation Thu Jan 12, 2023 10:00 pm
Hi i have bought a spid rotator that will run on 12/24V,
I forget the exact figures but 12V it will do 360 in lets say 2 minuets 24V 1 minute therefore i would like to use a variable power supply, any recommendations please 5amp would be sufficient.
Alan Pilot Major contributor
Call Sign : 163-CT-220...MW7TTA Posts : 2516 Times Thanked : 69 Join date : 2019-11-19 QTH or Location : Anglesey North Wales Equipment Used : Yaesu FT-991A,,Yaesu FTDX-10,,Icom ic-7300,,Anytone AT-D878UV PLUS",,LINCOLN II+. Age : 150
Subject: Re: 12 to 24v variable power supply recommendation Fri Jan 13, 2023 5:58 am
Not sure about 24v but my 2 will crank up to 18v i think. Would think most would be the same. Only others i have seen that might go up that high are the test type but not much amp's in them.
Lee Shiel New Member
Posts : 39 Times Thanked : 0 Join date : 2022-12-25 QTH or Location : Chesterfield Equipment Used : Icom 718
Subject: Re: 12 to 24v variable power supply recommendation Fri Jan 13, 2023 9:50 am
Alan Pilot wrote:
Not sure about 24v but my 2 will crank up to 18v i think. Would think most would be the same. Only others i have seen that might go up that high are the test type but not much amp's in them.
Thanks Alan are they variable i guess 18V is going to move it a little quicker than 12V but it needs to be variable i dont want to be moving quick in windy conditions.
Mitch Contributor
Call Sign : M1TCH Posts : 79 Times Thanked : 8 Join date : 2020-01-02 QTH or Location : Leicester Equipment Used : Yaesu FT-857D, Diamond V2000, Major 3000, President Jackson Mk1, Lafayette AFS-1005, K40 mic, KL203, B550P and Sirio GPE 27 ⅝λ.
Subject: Re: 12 to 24v variable power supply recommendation Fri Jan 13, 2023 10:03 am
Lee Shiel wrote:
Alan Pilot wrote:
Not sure about 24v but my 2 will crank up to 18v i think. Would think most would be the same. Only others i have seen that might go up that high are the test type but not much amp's in them.
Thanks Alan are they variable i guess 18V is going to move it a little quicker than 12V but it needs to be variable i dont want to be moving quick in windy conditions.
If it takes less than 3 amps this might do the job: https://www.ebay.co.uk/itm/314146833562
Lee Shiel likes this post
Lee Shiel New Member
Posts : 39 Times Thanked : 0 Join date : 2022-12-25 QTH or Location : Chesterfield Equipment Used : Icom 718
Subject: Re: 12 to 24v variable power supply recommendation Fri Jan 13, 2023 10:48 am
Mitch wrote:
If it takes less than 3 amps this might do the job: https://www.ebay.co.uk/itm/314146833562
Thanks Mitch i was looking at them yesterday from memory i think i need 3amp but i would like something more on top of the job.
Lee Shiel New Member
Posts : 39 Times Thanked : 0 Join date : 2022-12-25 QTH or Location : Chesterfield Equipment Used : Icom 718
Subject: Re: 12 to 24v variable power supply recommendation Fri Jan 13, 2023 12:18 pm
Thinking out loud last time round i used PSTRotator software from memory it had a option for a slow speed maybe i could get a 24V and regulate via software.
Sponsored content
Subject: Re: 12 to 24v variable power supply recommendation
Today at 8:41 pm by spod
Subject: 12 to 24v variable power supply recommendation 
