Would you like to react to this message? Create an account in a few clicks or log in to continue.
Welcome to the Charlie Tango DX Group. The home of ALL things Radio - CB, 11m DX, Amateur, PMR446, PLD, Network and Data. We welcome all radio enthusiasts of all knowledge levels. Join today and claim your own unique World Famous CT Call-sign
Posts : 17 Times Thanked : 1 Join date : 2021-10-25 QTH or Location : Middlesbrough Equipment Used : Cobra148, cobra 19x, radio shack handheld Age : 63
Subject: Retevis rt23 Fri Jun 16, 2023 11:08 pm
How can I find 6 digit frequencies in Middlesbrough. Most are 7+. I have a Retevis rt23 that covers 136/174 and 400/480. Any help appreciated thanks
Victor CT Directors
Call Sign : 26-CT-3228 / M7VIC Posts : 6138 Times Thanked : 375 Join date : 2019-11-10 QTH or Location : Bedford Equipment Used : Various
Subject: Re: Retevis rt23 Sat Jun 17, 2023 5:56 am
Hi again Berni,
Channel frequency spacing in the UK for VHF/UHF is 12.5kHz apart but for PMR frequencies you might need to set the radio to 6.25k. (Or program the radio with the correct frequencies and then select 12.5kHz spacing.)
Page 19 of the manual shows you how to set the frequency step mode :-
The additional digits should show up as a small "25" or "75"
So for example PMR Channel 1 is 446.00625 so your radio will show "446.006" then a small "25" next to it. Then the next PMR Channel 2 is 446.01875 so your radio will show "446.018" then a small "75" next to it.
....and so on.
It is all in the manual but I know these little radios can be tricky to program/operate if you're not used to them.
As ever the old internet is abound with such helpful information so worth a good search.
Again, I hope that helps.
All the best, Victor
GaryWilson, Alan Pilot, Johnbolt61, DerekF and Alex728 like this post
Today at 7:58 am by SangueG
Subject: Retevis rt23 
