| CRT SS 9900 Jumping Freq | |
|
|
Author | Message |
---|
Airburst New Member
Call Sign : 26 CT /X 2023 Posts : 16 Times Thanked : 1 Join date : 2019-12-08 QTH or Location : Lancashire Equipment Used : Various
| Subject: CRT SS 9900 Jumping Freq Sat Jan 04, 2020 5:36 pm | |
| Evening All,
Anybody know , what or how to resolve a problem with a CRT SS9900
When i un key the radio jumps freq ?
Any infor would be great ,
Rob | |
|
| |
Sydthecat CT Directors
Call Sign : 2E0VRX Posts : 776 Times Thanked : 47 Join date : 2019-06-26 QTH or Location : Yorkshire dales Equipment Used : Yaesu FTdx 101d, MD200 mic ,Mosley 3ele Yagi Age : 59
| Subject: Re: CRT SS 9900 Jumping Freq Sat Jan 04, 2020 6:35 pm | |
| Hi Rob
Have you tried manual factory reset ?
Craig | |
|
| |
Airburst New Member
Call Sign : 26 CT /X 2023 Posts : 16 Times Thanked : 1 Join date : 2019-12-08 QTH or Location : Lancashire Equipment Used : Various
| Subject: Re: CRT SS 9900 Jumping Freq Sat Jan 04, 2020 6:40 pm | |
| - Sydthecat wrote:
- Hi Rob
Have you tried manual factory reset ?
Craig Not looked in to really ..as i dont have any cables with the radio ,if thiers a requirment to have one | |
|
| |
Sydthecat CT Directors
Call Sign : 2E0VRX Posts : 776 Times Thanked : 47 Join date : 2019-06-26 QTH or Location : Yorkshire dales Equipment Used : Yaesu FTdx 101d, MD200 mic ,Mosley 3ele Yagi Age : 59
| Subject: Re: CRT SS 9900 Jumping Freq Sat Jan 04, 2020 7:27 pm | |
| No lead needed just fellow the reset instructions contained within the operating manual
Craig | |
|
| |
Rotel240 New Member
Posts : 14 Times Thanked : 0 Join date : 2019-06-28 QTH or Location : Yorkshire
| Subject: Re: CRT SS 9900 Jumping Freq Sat Jan 04, 2020 8:24 pm | |
| I had this problem so just changing the mic sorted it. | |
|
| |
Razz229 Major contributor
Call Sign : 26 CT 2290 & 26 CI 2290 Posts : 834 Times Thanked : 30 Join date : 2019-07-01 QTH or Location : Kent Equipment Used : On 11m a Anytone 6666, Solarcon A99 vertical antenna or a Sirio 4000. On PMR a CRT Space U, a 1/4 wave GPA, homemade mag mount & sometimes a 8 element beam. Age : 57
| Subject: Re: CRT SS 9900 Jumping Freq Sun Jan 05, 2020 11:15 pm | |
| Hi Rob.
I had the same problem with my CRE 8900, key up on channel 39 and start talking and midsentance i would be on channel 37! I dumped the mic for a K-PO NM-532 power mic. Hope this helps
73 Ray 26ci2290 & 26ct2290 | |
|
| |
stephen Gunrunner Major contributor
Call Sign : 26CT526/MR021/M6XXX. Posts : 277 Times Thanked : 11 Join date : 2019-06-27 QTH or Location : wooler north northumberland or some were near it Equipment Used : mobile 4000hp base A99 radio base magnum257hp mobile magnum 257 standed power Age : 67
| Subject: Re: CRT SS 9900 Jumping Freq Mon Jan 06, 2020 3:17 pm | |
| I had the same great radio and a 50p mic so I changed mic and all is well again | |
|
| |
Airburst New Member
Call Sign : 26 CT /X 2023 Posts : 16 Times Thanked : 1 Join date : 2019-12-08 QTH or Location : Lancashire Equipment Used : Various
| Subject: Re: CRT SS 9900 Jumping Freq Mon Jan 06, 2020 9:37 pm | |
| Cheers fellars will try a new mike first
Rob | |
|
| |
Pagan Senior contributor
Call Sign : 26CT2069 Posts : 142 Times Thanked : 22 Join date : 2019-08-09 QTH or Location : Pendle, Lancashire Equipment Used : CRT-SS9900
| Subject: Re: CRT SS 9900 Jumping Freq Tue Jan 07, 2020 5:41 am | |
| - Airburst wrote:
- Cheers fellars will try a new mike first
Rob Try using a mic that DOESN'T have an "up / down" channel change button.....I think that's what causes the problem. | |
|
| |
Sponsored content
| Subject: Re: CRT SS 9900 Jumping Freq | |
| |
|
| |
| CRT SS 9900 Jumping Freq | |
|