Scan125 Control Program - New Release

I've just released V2.9.0.0 of the Scan125 Control Program.

NEW in V2.9.0.0
Add - Bank Channel Sort and Save to scanner
Add - Frequency ranges to Custom Search check box controls mouse over tool tips
Add - Scan Banks channel name and number lookup for Search and Services scan hits
Add - Information message when recording fails to initialise possibly due to no audio cable between scanner and PC's sound card
Add - Message "Channel Store/Copy/Move Pending - Please Select the Channel Prefix Field on the far left of the data grid."

Fixes in V2.9.0.0
Fix - Band Plan BPL command on BC125AT only supported in firmware V1.03.01 and above

Known Issues in V2.9.0.0
None

See http://www.nick-bailey.co.uk/scan125 for details.

This is for Uniden UBC125XLT, BC125AT, UBC126AT and Albrecht AE125H Scanners.

I've just released V3.1.0.0 of the Scan125 Control Program.

This release introduces the ability to select and audio input for sound recording plus some minor items.

See http://www.nick-bailey.co.uk/scan125 for full details.

This is for Uniden UBC125XLT, BC125AT, UBC126AT and Albrecht AE125H Scanners.

PS. Don't know where the V3.0.0.0 announce went but for those wanting continuity of information then please see the Scan125 History file https://www.nick-bailey.co.uk/scan125/previous_release_history.html

I've just released V3.2.0.0 of the Scan125 Control Program.

See http://www.nick-bailey.co.uk/scan125 for full details.

This is for Uniden UBC125XLT, BC125AT, UBC126AT and Albrecht AE125H Scanners.

Will it ever support the sds100/200e.

Alan Pilot wrote:

Will it ever support the sds100/200e.

I doubt it.
 
Writing or adapting software for hardware one does not have is very difficult and time consuming especially as for some of the commands used to get get information from the scanner at high and repetitive speeds to support full virtual control often get dropped, ignored or replied to in the wrong order.  This happens with the 125 and 75 scanners and has caused a lot of problems.

I've just released V3.3.0.0 of the Scan125 Control Program.

Of note with this release is the generation of a ScannFTP.html file.

This HTML file contains information regarding the current frequency being monitored (with tag name) and optionally the previously monitored frequency information.

This file is for those who stream audio and want to provide web page information about their current stream.

Have also written AutoFTP program which will watch the ScannerFTP (or any other file) for changes and then FTP that to your chosen location.

See Scan125 Control Program (https:\\nick-bailey.co.uk\scan125) for details.
See AutoFTP (https:\\nick-bailey.co.uk\autoftp) for details.

I've just released V3.4.0.0 of the Scan125 Control Program.

See Scan125 Control Program (https://nick-bailey.co.uk/scan125) for details.

Appreciate it Nick, thank you.

No problem.  It was later than I wanted to  release and was held up by Scan75 work which I was bringing up to the equivalent level/function as Scan125 and also adding Uniden SR30C scanner support into Scan75. 
 
I have a guy in the US Beta testing with and SR30C so hope to release Scan75 soon. 
 
Any UK users with a Uniden SR30C scanner are welcome to test as well by contacting me.